Wet Area White 75g

Selleys Wet Area Silicone Sealant is ideal for use in bathrooms, kitchens and laundries and delivers a superior waterproof and mould resistant seal that will not shrink, crack or peel away.
RM 14.30
Availability: In stock


  • 100% silicone sealant
  • Waterproof seal – superior adhesion and resistance to lifting provides a long lasting, flexible seal
  • Mould resistant – helps prevent growth of unsightly black mould and fungus
  • Available in a range of colours to suit most wet areas
  • Non corrosive neutral cure formula

Product Specs

Size 75g Tube
Colour White
Full Cure Time Cures in 8 hours, best to be left for 24 hours
Technology Neutral Cure Silicone
Use Exterior, Interior

where can this product be used?

  • Shower screens
  • Baths
  • Spas
  • Sinks
  • Plumbing fixtures

What materials is this product suitable for?

  • Ceramic, glazed and porcelain fixtures
  • Metal, copper and brass fittings
  • Plastic laminates
  • Rubber
  • Glass
  • Stainless steel
  • Concrete and grouts

how to use

For General Use:

  • Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry).
  • Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
  • Pierce tube with reversed side of cap.
  • Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle.
  • Apply on needed surface and, smoothen with a scraper or spatula.
  • Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 2 hours before using the area.


  • Not paintable. Complete painting 7 days prior to applying sealant.
  • Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
  • Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
  • Not suitable for aquariums.
  • Not suitable for food or drinking water contact.
  • Not suitable for permanent water immersion.

handy tips

  • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
  • Work in sections that can be completed before sealant skins.
  • Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.

clean up

  • While the sealant is still wet, clean off excess sealant with a cloth soaked with acetone
  • Cured product can be removed by cutting and scraping