Sign In 
Register 
FAQ 
FEATURES
- Stops annoying squeaks
- RP7 displaces moisture
- Loosens rusty and sticky parts
- Protects against rust and metal corrosion
- Cleans off grime
- Starts wet motors
- Will not adversely affect rubber, paintwork or most plastics
Download Safety Data Sheet
Product Specs
| Size | 75g Tube, 320g Catridge |
| Colour | Amber |
| Use | Exterior, Interior |
where can this product be used?
- Penetrates and lubricates – rusted metal parts, nuts and bolts, hinges, mechanical parts
- Repels moisture from – distributors, spark plugs, relays, wet engines
- Eliminates noisy squeaks from – doors hinges, moving parts, wheels, toys, chairs, bicycle chains
- Penetrates to allow movement – locks, tools, zippers, gears
- Protects against corrosion – instruments, tools, bikes, rods and reels, metals, garden tools
- Cleans most surfaces and removes – grime, adhesives, tar and gum, fingerprints
What materials is this product suitable for?
- Metals
- Steel
- Iron
- Copper
- Brass
- Aluminium
- Magnesium alloys
- Machinery
- Rusted parts
how to use
For General Use:
Spray affected areas with RP7 and allow 5 minutes for product to penetrate.
To Start Wet Motors
- Remove distributor cap, wipe with a dry rag if soiled and then spray with RP7.
- Replace cap and spray around distributor cap, spark plugs, coil, generator, starter motor, leads, etc. RP7 draws out moisture which causes ignition short circuits – helps maintain correct electrical performance.
To Penetrate And Loosen:
- Spray RP7 on seized or stiff joints, nuts, bolts, etc.
- Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases. Use RP7 as a general purpose lubricant – eliminate squeaks and keep mechanisms functioning smoothly.
To Protect Against Rust And Corrosion:
- Simply spray RP7 periodically over nuts, hinges, linkages, garden tools or other metal parts.
- RP7 penetrates into confined spaces to displace moisture and protect against rust. RP7 will not harm rubber or paintwork. The duration of protection obtained using RP7 will vary depending on the type of material being protected and the conditions of exposure.
handy tips
- Spray RP7 on seized or stiff joints, nuts, bolts, etc. Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases. Use RP7 as a general purpose lubricant – eliminate squeaks and keep mechanisms functioning smoothly.
- The duration of protection obtained using RP7 will vary depending on the type of material being protected and the conditions of exposure.
- If the surface is to be painted, wash with mineral turpentine after RP7 has been applied.