Part A: Clear
Part B: Clear
(Both parts combined are clear)
Full Cure Time
Sets in 5 minutes
where can this product be used?
For areas needing fast and reasonable strong adhesion – most household fixes (eg broken broom handle, loosened chair fixture
What materials is this product suitable for?
how to use
Surfaces to be repaired should be clean, dry and free from dirt or grease.
Unscrew caps of each tube and pierce with own cap to avoid contamination. Dispense equal amount of resin and hardener (Part A and B) onto a clean disposable surface and mix thoroughly. The mixture will remain usable for 3 – 4 minutes.
Apply surfaces to be repaired and allow to harden.
To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle.
For exterior applications, always ensure product is well dried at for least overnight (24 hours) before exposing to environment
Not suitable for bonding plastics such as Polypropylene and Polyethylene
Clean all tools or equipment used while adhesive is still in its uncured state.
Use acetone, toluene, methyl ketone or kerosene to clean tools and spills.