All Clear

Selleys All Clear is a multipurpose crystal clear sealant that is suitable for use on most general sealing applications. It’s crystal clear appearance leaves a seamless finish.
RM 14.00
Availability: In stock
All Clear


  • Works on wet, oily and dirty surfaces
  • Crystal clear finish
  • Paintable
  • Mould and mildew resistant
  • Water resistant
  • Strong adhesion

Product Specs

Size 75g Tube
Colour Crystal Clear
Full Cure Time Cures is 8 hours, best to be left 24 hours
Technology Co-polymer
Use Exterior, Interior

where can this product be used?

  • Sky lights
  • Window frames and glazing (non structural)
  • Roof and gutters
  • Sealing metal or PVC guttering and down pipes
  • Air conditioners entries
  • Sealing metal or PVC guttering and down pipes
  • Shower screens
  • Sinks and basins

What materials is this product suitable for?

  • Metal
  • Timber
  • Glass
  • Glazed tiles
  • Brick
  • Stone
  • Many plastics (may damage polystyrene and polycarbonate)

how to use

Use only in a well ventilated area. Avoid contact with skin and eyes and breathing vapors.

  • Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry)
  • Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
  • Pierce tube with reversed side of cap.
  • Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle
  • Apply on needed surface and, smoothen with a scraper or spatula.
  • Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 6-8 hours.


  • May damage some plastics – eg. polystyrene and polycarbonate.
  • Not for permanent water immersion – eg. fish tanks.
  • Not suitable for use over silicones.
  • Not suitable for polystyrene foam.

handy tips

  • Wet surfaces – can be applied to clean, wet non-porous surfaces (eg, metals, glass , glazed tiles)
  • Fast skinning – skins in 5 minutes
  • Paintable once dried with both water based and oil based paints
  • Store in a cool and dry place below 30 degree Celsius

clean up

  • Uncured product may be removed with mineral turpentine.
  • Cured product can be removed by cutting and scraping.